Wiki
- Designer Workshop - w/ Tutorials
This is an old revision of the document!
To create a sandbox for your board which can be added/removed at will in the designer, you will create two fill images for your board. One, for actual game play that matches the pixel dimensions of your board layer, and the second (the “sandbox”) for expanding the view of your board in the designer which is larger.
Make a second fill map that is larger than your board image. The extra space should..
Load your “sandbox” into the designer.
Once your sandbox is loaded, design your board with its off-screen territories by placing them into the expanded space to the right or bottom of your board.
Once you are happy with your creation and want to do some development games then upload the actual fill area for game play which is not expanded for sandbox visibility. This will slide those territories out of the designer and will no longer be visible during game play. If a problem occurs during your development games then re-upload the expanded fill image to make the appropriate revisions to those off-screen attributes, then re-upload the fill area for game play to obscure them again, etc, until you are completely satisfied with the mechanisms of your board.